Views: 800 Author: Site Editor Publish Time: 2026-11-06 Origin: Site
The short answer: let the conversation decide the combination, confirm every piece of the set in writing, draw the whole group's footprint before you order, and put colors and materials on one written standard so every piece matches.
If you are planning an office sofa and chair set for a reception corner, an executive office or a waiting area, the hard part is not choosing a sofa. It is making the office sofas and chairs work as one set: the right combination for the conversations you host, every piece actually included in the quote, a footprint the room can carry, and finishes that match across all of it. This page gives you a combination table, an inclusion checklist, a footprint method with a concept layout, a finish checklist, and a seating schedule template you can copy straight into an inquiry.
Four LIYU models appear as worked examples: YQ-SC2208, a waiting-room set photographed as a three-seat sofa with two armchairs and a glass coffee table; LDSF51-1, listed as a 1+2+3 modular sectional; LD-24-02, reception accent seating that includes corner sectional and armchair forms; and LD-24-8, a compact group photographed with a sofa, matching armchairs and a coffee table. For every model the same rule applies: what a specific quote includes is settled in writing, per order.
Start from the conversation, not the room. A set exists to seat one conversation circle: everyone in the group should be able to speak to everyone else without leaving their seat. Count how many people take part in that conversation at your busiest moment, then pick the combination that seats that number around one table. The room decides how many circles fit; the conversation decides what each circle looks like.
Combination | Conversation it serves | Where it works best | Confirm with the supplier |
|---|---|---|---|
Three-seat sofa + two armchairs + coffee table | One circle of 4 to 5 people around a shared table | Reception corners and executive offices with one defined meeting side | Exact pieces and quantities in the quote; whether the table is included |
1+2+3 (three-seat + two-seat + single seat) | Two linked circles, or one group spread along two walls | Larger rooms arranged as an L or a U; LDSF51-1 is listed in this form | Whether the units connect or stand alone; which size-combination option matches your room |
Two-seat sofa + one or two armchairs + compact table | One circle of 3 to 4 people in closer quarters | Compact reception corners and small executive offices; LD-24-8 is photographed in this form | Chair count per price and table size |
Corner (L-shaped) sectional + round coffee table | One continuous run seating 4 to 6, no extra chairs needed | Open lobbies and corner zones; LD-24-02 includes this form | Whether the corner is one piece or two units joined; ottoman included or not |
When does a 1+2+3 beat a sofa plus armchairs? Neither is better; they solve different rooms. A three-seat sofa with two armchairs keeps one conversation in one circle: everyone shares the table, eye contact is easy, and the group reads as a single unit from the door. A 1+2+3 spread suits rooms where two smaller conversations happen at once, or where seats must line two walls. Two details decide the 1+2+3 route: whether the three pieces connect into one sectional or stand as separate units, and which sizes each piece takes. The LDSF51-1 product page lists numbered size combinations (Specification 1 through 9) as selectable options; each number is a selector label, so ask for the drawing and the piece list behind the number you choose. The YQ-SC2208 page describes its collection's modules as able to lock together or stand freestanding, which is exactly the flexibility worth asking every supplier to put in writing.
Image source: LIYU product page. Model YQ-SC2208, a waiting-room set photographed as a three-seat sofa, two armchairs and a glass coffee table.
Waiting rooms that take walk-in visitors usually run the first or fourth row at higher seat counts; the reception office sofas page sorts those sets by visitor numbers and cleaning routines. Executive offices more often run row one or row two beside the desk; the executive office sofa sets page compares three-seat and 1+2+3 arrangements in that setting. If a space needs single seats only, dedicated sofa chair ranges cover that case without forcing a sofa into the plan.
Image source: LIYU product page gallery, model LDSF51-1. Modular sectional units arranged in different layouts; each layout is a configuration to confirm in writing.
A set photo is not a packing list. Photographs show the complete group because that is what sells the room, but an office sofa set is quoted piece by piece, and the table or the second chair that never made it into the quote is discovered at delivery, not before. So before comparing prices, list the pieces and make the supplier confirm each line.
Set inclusion checklist: make every line explicit
Three-seat sofa: quantity and model code
Two-seat sofa, if the layout uses one (1+2+3 layouts)
Armchairs or single chairs: quantity and model code
Coffee table: included or not, size, and top material
Side tables or ottomans, if they appear in the photo
Cushions: included or optional, and in which fabric
Assembly state on arrival: assembled or knocked down
Packaged dimensions and package count per piece
The worked examples show why the list matters. YQ-SC2208 is photographed with its coffee table and its product page describes materials and structure at length, but piece counts are fixed where they belong, in the quote. LD-24-8 carries the words "single chair" in its title and shows armchairs beside the sofa in its photos, so the exact chair count per price belongs in writing too; its page, like the LDSF51-1 page, lists numbered size-combination options (Specification 1 to 3), each a selector waiting for its drawing. And a price hint in a title, such as "low price", is not a price: the number follows the configuration of pieces, sizes and materials written into the quote.
Image source: LIYU product page, model LD-24-8. A sofa, matching armchairs and a coffee table photographed together; the quote lists which pieces the price includes.
Two more questions settle the set's structure. Can pieces be bought separately later, an extra armchair for a new office, for example? Many commercial lines are produced as individual models, so the answer is often yes, but availability and minimums are per-series facts worth recording while you have the model codes at hand. And are all pieces from the same series? The model codes answer it; if the group mixes models, the finish match across models moves onto the checklist in the section below.
A set takes more floor than the sofa alone, and it takes it in every direction: table in front, chairs at the sides, people passing behind. Draw the whole group before you order any of it.
Take each piece's dimensions from the supplier's dimension sheet for your configuration. LIYU's commercial sofa pages treat sizes as customized per order, so the sheet, not the catalog photo, is the number source.
Tape the largest piece on the floor first, usually the sofa, at its full width and depth.
Place the coffee table in front of the seats. A working planning allowance for the office sofa and coffee table gap is roughly 40 to 45 cm, close enough to reach a cup, far enough for knees.
Mark the walkways. Main routes through the room are commonly kept 75 to 90 cm clear.
Add door swings, columns, the reception desk and anything that opens, then walk the plan: sit down, cross your legs, get up, pass the table.
Entrance
Main walkway kept clear: allow 75 to 90 cm as a common planning allowance
Coffee table
Reach zone between seats and table, roughly 40 to 45 cm
Armchair
Three-seat sofa
Armchair
Concept layout for planning purposes. It is not a photograph of a real project and not to scale; redraw it with the dimension sheet of your own configuration.
Two numbers finish the check. Total footprint is the pieces' dimensions plus the clearances between them, summed on the plan; if the group mixes models, each piece's sheet line adds its own. Package count is the pieces per set and their packaged dimensions, which the inclusion checklist already asked for: a group of five pieces rarely ships as one box, and your delivery route cares about the boxes.
Corner arrangements deserve an extra pass. An L-shaped sectional such as the one in the LD-24-02 photos anchors itself to two walls at once, so columns, window sills and door swings that a straight sofa would miss can catch a corner run. Tape both legs of the L, not just one.
Image source: LIYU product page gallery, model LD-24-02. A corner sectional run with a round coffee table and an ottoman.
One order should be one color, and the only reliable unit of color is a code plus a physical sample, not a name. Two pieces can share a color name and still leave the factory weeks apart in different dye batches; in a bright lobby the difference reads immediately, and a re-order that arrives a shade off the first container forgives nothing.
LIYU's own pages show why the written statement matters. The LDSF51-1 title carries both "leather" and "PU material"; the YQ-SC2208 page describes a choice of genuine leather, easy-clean antibacterial vinyl and commercial-grade woven fabrics over multi-density sponge cushions. Both are normal for commercial seating made to order, and both mean the same thing: the material on your pieces is what the quote and the swatch say it is, piece by piece.
Coordination extends past the upholstery. A coffee table brings its own finish, glass, metal or wood, and it sits closer to the fabric than anything else in the room. If the set must match furniture you already own, a desk, cabinets or doors, put those color codes on the same written standard as the new pieces.
Finish confirmation checklist
Color code for every upholstered piece, not just the color name
Material and grade per piece, including which panels carry the primary material and which carry matching material
One production batch for the whole order where the factory offers it
Approved swatch kept with the order reference
Cushion fabric stated separately from body material
Mixed-model groups: finish match confirmed across model codes
Re-orders compared against the retained swatch, with the tolerance in writing
Judge the swatch under your lighting, not the showroom's. Reception lighting runs cooler than executive lighting, and a color that matched under spotlights can drift under ceiling panels. The sample on your desk is the one that decides.
The deliverable that holds all of this together is a seating schedule: one list that names every piece with its model code, quantity, material and color code, and where it stands in the room. Hand one to any supplier and the quote comes back checkable. Keep one after delivery and the re-order is repeatable.
Send one when several furniture groups share a room, when the set must match finishes you already own, when pieces will be ordered across phases or rooms, or when you are still choosing between straight, facing and corner arrangements and want the options priced on the same basis.
A coordinated seating schedule you can copy
Scene: reception, executive office or waiting area
Layout chosen from the combination table: row 1, 2, 3 or 4
Schedule: piece, model code (optional), quantity, material and color code, position in the room
Seats needed at the busiest moment: total count
Space: room dimensions or a floor plan with the entrance and fixed furniture marked
Finishes to match: color codes of existing furniture, if any
Delivery: country and city, target time, budget (optional)
To be stated in the quote: exact pieces included, whether tables are included, packaged dimensions and package count, the material statement per piece, and the trade term
Your contact: name, company and email
If you are still comparing forms across the whole range, LIYU gathers its commercial office sofa options on one page, set forms and single sofas together. Email the schedule above to ada@liyu-furniture.com or send it through our contact page. A rough plan with a city and a timeline is enough to start.
Are all pieces in a set from the same series?
The model codes tell you. Ask for the code of each piece, and if the group mixes models, get the finish match across models confirmed in writing under the same color codes before the order is placed.
Can I order pieces of a set separately?
Often yes, because commercial lines are usually produced as individual models, but availability and order minimums are per-series facts. Record the model codes of the pieces you may want later, then confirm the separate purchase when you need it.
How do I confirm the total footprint and the package count of a set?
Add each piece's dimensions from the supplier's dimension sheet, add the clearances between pieces, and ask for packaged dimensions and pieces per set in writing. The plan plus the package list is exactly what your delivery route check needs.
Does a 1+2+3 listing mean three fixed sofas or connectable modules?
It reads as a three-seat piece, a two-seat piece and a single seat, but whether they connect is not settled by the label. Some listings offer numbered size combinations, and the drawing and connection detail behind the number you choose should be confirmed in writing per order.
Does a set include the coffee table?
Photos often show one, quotes decide. The YQ-SC2208 set is photographed with a glass coffee table in the group, and whether your quote includes it is exactly what the inclusion checklist fixes before you compare prices.
Ready to specify the whole group?
Request a Coordinated Seating Set Quote
Send the seating schedule above with your scenario, city and timeline; a rough plan is enough to start.